E30A Emulator User
’s Manual
3. Starting Up the Emulator Debugger
R20UT0422EJ0501 Rev.5.01
Page 39 of 65
Mar 15, 2016
3.4 Entering ID Code
If the target MCU has ID code set in it, the ID Code verification dialog box shown below is displayed. Enter the 7-byte ID
code written to the internal flash ROM into the dialog box successively. Table 3.2 shows the ID code storage area.
- Enter ID1 -- ID7 successively in that order and then click “OK”. Unless all IDs match, the emulator debugger will not start.
Table 3.2 ID Code Storage Area
Address
Description
FFFF_FFE8h
First byte of ID code
FFFF_FFE9h
Second byte of ID code
FFFF_FFEAh Third byte of ID code
FFFF_FFEBh Fourth byte of ID code
FFFF_FFECh Fifth byte of ID code
FFFF_FFEDh Sixth byte of ID code
FFFF_FFEEh Seventh byte of ID code
