E30A Emulator User
’s Manual
1. Outline
R20UT0422EJ0501 Rev.5.01
Page 13 of 65
Mar 15, 2016
1.2 System Configuration
The E30A emulator is used connecting the target MCU that mounted on the user system. Figure 1.1 shows a configuration of
the E30A emulator.
Figure 1.1 E30A emulator system configuration
(1) E30A Emulator (this product)
(2) AC adapter (included)
(3) USB 2.0 high-speed cable (included)
(4) 50
Ω
coaxial cable (included)
(5) User system:
This is your application system using the MCU to be debugged. The emulator cannot supply power to the user system. Get
a power supply separately.
(6) Host machine:
This is a personal computer to control the emulator by USB interface.
1.3 Operating Environment
-
IBM PC/AT compatibles (Windows
®
7 64-bit editions *
1
, Windows
®
7 32-bit editions *
1
,
Windows Vista
®
32-bit editions *
1
*
2
, Windows
®
XP 32-bit editions *
1
*
2
, Windows
®
2000 *
1
)
*1: Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
*2: The 64-bit editions of Windows Vista
®
and the 64-bit editions of Windows
®
XP are not supported.
1.4 PC Interface
-
USB interface *
1
USB 2.0 high-speed (also connectable to the USB 1.1-compatible host machine)
*1: Operation with all combinations of host machine, USB device and USB hub is not guaranteed for the USB interface.
User System
E30A Emulator
50
Ω Coaxial Cable
USB 2.0 High Speed
AC Adapter
Host Machine
