E30A Emulator User
’s Manual
3. Starting Up the Emulator Debugger
R20UT0422EJ0501 Rev.5.01
Page 37 of 65
Mar 15, 2016
3.2.5 Mode tab
This tab permits you to select an operating mode and specify the download to flash ROM area and the writer mode. Table 3.1
lists the debug functions depending on the operating mode.
Table 3.1 Debug functions depending on the operating mode
Mode
Break
Trace
Time
Measurement
RAM
Monitor
Execution
Address
Data
Access
Address
Range
Data
Comparison
Trace: Trace priority
Yes
Yes
-
-
Yes
-
-
Trace: MCU execution
priority
Yes
Yes
-
Yes
Yes
-
-
Time Measurement
Yes
Yes
-
-
-
Yes
-
RAM Monitor
Yes
Yes
Yes
-
-
-
Yes
Writer
-
-
-
-
-
-
-
(1)
Mode
Select an operating mode from “Trace”, “Time measurement”, “RAM monitor” or “Writer”.
- Trace: You can record the execution history of the user program and data access information. “Trace priority” or “MCU
execution priority” can be selected from the Trace Mode in the Event Setting window.
- Time Measurement: You can measure an execution time between Go and Stop, or a section time between data accesses
based on trace information.
- RAM monitor: You can view memory data while the user program is running.
- Writer: You can write the specified object files to the internal flash ROM of the target MCU.
(2)
Download to Flash ROM Area
If you want to verify the flash ROM area when downloading a user program, select the check box.
