QB-V850MINIL, QB-V850MINI Emulator 4. Debugging with In-Circuit method
R20UT0221EJ0400 Rev.4.00
Page 60 of 86
2013.08.30
4.2.2
System configuration when using optional products
The figure shown below illustrates the system configuration when using optional products. The items enclosed by
dotted lines are the optional products. Applications of the optional products are described on this page. Refer to
4.2.3 List of optional product names
for the corresponding product names.
Figure 4-2. System Configuration with Optional Products
<1> Host machine:
With USB ports
<2> USB (accessory)
<3> QB-V850MINIL or QB-V850MINI (this product)
<4> OCD cable (accessory)
<5> V850MINI Self-check board (accessory) (included with the QB-V850MINI) or QB-V850ESKX1H-DA
<6> Check pin adapter (sold separately): An adapter used for monitoring waveforms with an oscilloscope, etc.
<7> Coaxial type extension probe (sold separately): A cable used to extend the distance between the emulator
and target system.
<8> Exchange adapter (sold separately)
<9> Space adapter (sold separately):
An adapter used to adjust the height.
<10> Mount adapter (sold separately):
An adapter used to mount the device in the socket.
<11> Target connector (sold separately): A connector mounted on the target system.
<1>
<2>
<3>
<5>
<8>
Device
<9>
<7>
<6>
<4>
Target system
<11>
<10>
