QB-V850MINIL, QB-V850MINI Emulator 3. On-Chip Debugging
R20UT0221EJ0400 Rev.4.00
Page 32 of 86
2013.08.30
（
3
）
Power application to target system
Apply the power to the target system. After power application, confirm that the TARGET LED on
QB-V850MINIL or QB-V850MINI is lit.
When using the QB-V850MINIL, if the yellow LED is on, it means that an overvoltage may be being applied.
Check the target system's power supply and make sure that an appropriate voltage is being applied.
（
4
）
Running the software
Start up and run the software as described in the supplied user's manual.
3.2.4
System shutdown
Terminate debugging and shutdown the system in the following order.
（
1
）
Terminate the the software tool.
（
2
）
Turn off the power to the target system.
（
3
）
Disconnect the USB cable from the host machine.
3.3
Default Setting
Item
Setting
Description
SW1
All of switches 1 to 8 are set to OFF by default.
Refer to
3.2.2 Switch settings
for how to set the switches.
