Renesas M306K9T2-CPE, Руководство пользователя

Страница: 22 / 56

( 22 / 56 )
2.4 Connecting the Emulator System
How to connect the emulator system is described hereafter.
Figure 2.5 Connecting the emulator system
(1) Connecting the USB Interface Cable
Connect the USB interface cable (included) to the USB interface connector (J2) and the USB port
of the host machine (see Figure 2.5).
(2) Connecting the Power Cable
Connect the power supply for the emulator to the power connector (J1). The specification of the
power supply for the emulator is listed in Table 2.6.
Table 2.6 Specification of power supply of the emulator
Figures 2.6 and 2.7 show the specifications of the power connector and an applicable plug,
respectively.
Figure 2.6 Specification of the power connector Figure 2.7 Specification of an applicable plug
Electrode (+) Electrode (-)
ø4.75 mm
ø1.7 mm (Inside diameter)
DC 5.0 V
±
5%, 2 A Power supply voltage
MADE
POWER
SW1
COMPACT EMULATOR
CLOCK
RESET
RUN
LED3
LED6
LED5
LED4
POWER
LED1
SAFE
LED2
b
J1
J2
EXT
5.0V
INT
JP1
JP2
3.3V
Connect the power cable to connector J1. Connect the USB interface cable to connector J2.
To host machine To emulator power supply
CAUTION
Note on Connecting the Power Supply of the Emulator:
• Be careful about the polarity of the power supply. Connecting to the wrong electrode
could destroy internal circuits.
• The power cable included in this product package is colored red (+) and black (-).
• Do not apply a voltage exceeding the specified voltage of the product (5.0 V
±
5%),
because it may cause burn injuries and the failure of internal circuits.