Renesas M306K9T2-CPE, Руководство пользователя

Страница: 21 / 56

( 21 / 56 )
(2) Function Selection Switches
According to the usage, set these switches as described in Table 2.5 below.
Table 2.5 Setting function selection switches
CAUTION
Note on Setting Switches and Jumper Switches:
• Always shut OFF the emulator before changing the setting of the switches and
jumper switches, and connecting the cable.
Signal Switch Setting Description
P87/XCIN
SW1
SW2
XOUT SW3
Connects pin P87/X
CIN
of the MCU to the target
system (uses pin P87/XCIN as P87).
Connects pin P87/X
CIN
of the MCU to the sub-clock
oscillator circuit (32.768 kHz).
Does not connect pin P86/X
COUT
of the MCU.
Does not connect pin X
OUT
of the MCU.
Connects pin X
OUT
of the MCU to the target system.
Connects pin P86/X
COUT
of the MCU to the target
system (uses pin P86/X
COUT
as P86/X
COUT
).
Factory-setting
Factory-setting
Factory-setting
OPEN P86
XOUT OPEN
XCIN P87
P86/XCOUT
XCIN P87
OPEN P86
XOUT OPEN