1AB8651.0
None
NOTES
CC.1 - CC.0
Lock the computer using the fault finding tool command.
Switch off the ignition, disconnect the computer connector and fit the 50 track B50 adaptor.
The XRBAG must be used to measure insulation appropriate to the type of fault declared by the fault
finding tool on adaptor cable D .
Is the value obtained correct?
Check the condition of the connections on the 50 track computer connector (tracks 13
and 14).
YES
Check the condition of the connections on the 50 track computer connector (tracks 13
and 14).
NO
If the value remains incorrect, replace the air bag wiring.
DF004
present
CONT
AFTER REPAIR
Reconnect the computer and the passenger air bag ignition module, then switch
on the ignition.Erase the computer memory then switch off the ignition.Carry out
a check using the fault finding tool and, in the absence of a fault, unlock the
computer . Destroy the passenger air bag module if there has been a replacement
(tool Elé. 1287).
FAULT FINDING - INTERPRETATION OF FAULTS
WIRING
Air bags and seat belt pretensioners
SIDE
88
88-57