REMS Ax-Press 25 22 V ACC Скачать руководство пользователя

Страница: 13 / 168

eng eng

2.2. Installing (changing) the pressing heads (5) in axial presses (Figs. 1, 2)

Remove the battery. Only use system-speciﬁ c pressing heads. REMS press ing

heads have a letter to identify the compression sleeve system and a number

to identify the size. Read and observe the installation and assembly instructions

of the manufacturer/supplier of the used compression sleeve system. Never

use non-matching pressing heads (compression sleeve system, size) for

pressing work. The press joint could be unserviceable, and both the machine

and the press ing heads might be damaged.

Push the selected pressing heads (5) right in, if necessary turning them until

they engage (ball catch). Keep the pressing heads and locating hole inside the

pressing device clean.

2.3. Installing (changing) the expanding head (7) in REMS Power-Ex-Press

P-CEF ACC (Fig. 4)

Pull out the mains plug. Read and observe the installation and assembly

instructions of the manufacturer/supplier of the used system. Never use non-

matching expanding heads (system, size) for expansion work. The joint could

be unserviceable, and both the machine and the expanding heads might be

damaged. Grease the cone of the expanding mandrel (9) lightly. Screw the

selected expanding head as far as it will go onto the expander. Read and

observe the installation and assembly instructions of the manufacturer/supplier

of the used system. REMS P and Cu expanding heads are unsuitable for the

REMS Power-Ex-Press P-CEF ACC and may therefore not be used..

Changing the expanding device on the REMS Power-Ex-Press P-CEF ACC

Pull out the mains plug. Unscrew the expanding device (6) from the REMS

Power-Ex-Press P-CEF ACC. Screw on the selected expander as far as it will

go and tighten by hand.

2.4. Assembly (changing) of the expander (6), the expanding head (7) on REMS

Ex-Press 22 V ACC (Fig. 3)

Choose an expander (6) to match the expanding head (7). Use the expander

Cu for the REMS Cu expanding heads. Use the expander P for the REMS P

expanding heads. Use the P-CEF expander for the REMS expanding heads.

Only use system-speciﬁ c expanding heads. REMS P and REMS P-CEFexpanding

heads are labelled with letters to identify the compression sleeve system and

a number to identify the size, REMS Cu expanding heads only with a number

to identify the size. Read and observe the installation and assembly instructions

of the manufacturer/supplier of the used system. Never expand with an unsuit-

able expander, unsuitable expanding heads (system, size). The joint could be

useless and the machine and expanding heads could be damaged. Grease

the cone of the expanding mandrel (9) lightly.

Changing the P and Cu expander

Screw the selected expanding head onto the expanding device (6) to the stop.

The expanding device must now be set so that the thrust of the drive machine

is taken up by the drive machine and not the expanding head at the end of the

expanding. Unscrew the expanding device (6) complete with screwed on

expanding head from the drive machine for this. Let the feed piston run forward

as far as possible without the machine switching into reverse. In this position

the expander with screwed-on expanding head must be screwed onto the drive

unit until the expanding jaws (8) of the expanding head (7) are fully open. The

expanding head must be secured with the locking nut (11) in this position.

NOTICE

Make sure that the compression sleeve is far enough away from the expanding

head (7) in the expanding process because otherwise the expanding jaws (8)

can bend or break.

Changing the P-CEF expander

Remove the battery. Screw on the locking nut (11) and the selected expander

(6) up to the stop. Screw the selected expanding head (7) onto the expander

up to the stop.

3. Operation

CAUTION

After the drive unit has been in storage for a long period of time, the overpressure

valve must be actuated ﬁ rst by pressing the reset button (13) before putting back

into operation. If it is stuck or stiff, it may not be pressed. The drive unit must be

handed over to an authorized REMS customer service workshop for inspection.

3.1. Axial presses (Figs. 1, 2)

Note the different working range of the axial presses. The respectively latest

REMS sales literature applies, see also www.rems.de → Downloads → Product

Catalogues, Brochures. Make sure that the pressing heads (5) are inserted

into the drive unit in such a way that the pressing can be made in one stroke

if possible. This is not possible in some cases and pre-pressing and ﬁ nish

pressing is necessary. For this, one pressing head or both pressing heads must

be inserted turned 180° before the second pressing process so that they are

closer together.

Working procedure

CAUTION

Danger of cru shing! Keep your hands away from the moving pressing

heads (5)!

In REMS Ax-Press 30 22 V (Fig. 2) , place the preassembled compression

sleeve ﬁ tting inside the pressing heads (5). Hold the drive unit by the housing

grip (1) and the pistol grip (3), and keep the safety inching switch (2) pressed

until the compression sleeve is in contact with the collar of the compression

sleeve ﬁ tting This is indicated by an acoustic signal (click). Hold the reset button

(4) until the pressing heads (5) have moved back completely.
In REMS Ax-Press 25 22 V ACC, REMS Ax-Press 25 L 22 V ACC (Fig. 1), place

the preassembled compression sleeve ﬁ tting inside the pressing heads (5). On

the REMS Ax-Press 25 L ACC the closer distance of the pressing heads may

have to be achieved by moving the outer pressing head into the centre pressing

head position. Hold the drive machine either with one hand on the switch handle

(3) or two hands on the housing handle (1) and the switch handle (3). Keep the

safety inching switch (2) pressed until the compression sleeve is touching the

collar of the compression sleeve connector. The drive machine then switches

automatically to return (forced return).

If there is a noticeable gap between the compression sleeve and the collar of

the compression sleeve connector after closing the compression heads, the

pressing may be faulty or leaking (see 5. Faults). Read and observe the instal-

lation and assembly instructions of the manufacturer/supplier of the pressing

sleeve system to be pressed.

With the compression sleeve system IV, various pressing heads are needed

for one pipe size. Consult and comply with the instructions for installation and

ﬁ tting of the system’s manufacturer.

3.2. Pipe expanders

Working procedure

In REMS Ex-Press 22 V ACC with expander Cu (Fig. 3), insert the expanding

head into the pipe up to the stop and press the expanding head/drive unit

against the pipe. Switch on the drive unit. If the expanding head is open, the

drive unit switches automatically to return and the expanding head is closed

again. Read and observe the installation and assembly instructions of the

manufacturer/supplier of the used system.

In REMS Ex-Press 22 V ACC with expander P (Fig. 3), push the compression

sleeve over the pipe, insert the expanding head into the pipe up to the stop

and press the expanding head/drive unit against the pipe. Switch on the drive

unit. Make sure that the compression sleeve is far enough away from the

expanding head in the expanding process because otherwise the expanding

jaws (8) can bend or break. Keep the safety inching switch (2) pressed until

the pipe is expanded. This is indicated by an acoustic signal (click). Expand

several times if necessary. Turn the pipe slightly. Read and observe the instal-

lation and assembly instructions of the manufacturer/supplier of the used system.
In REMS Ex-Press 22 V ACC with expander P-CEF, REMS Power-Ex-Press

P-CEF ACC (Fig. 3, 4), push a ring of the appropriate size onto the pipe. Insert

the expansion head into the pipe and press the expanding head/drive unit

against the pipe. Switch on the drive unit. When the expanding head is opened,

the drive unit switches automatically to return and the expanding head is closed

again. Keep holding the safety inching switch (2) down in the REMS Ex-Press

22 V ACC and push the expanding head/drive unit further. Turn the pipe slightly.

Keep repeating the expansion process until the expanding jaws (8) are slid all

the way into the pipe. On REMS Power-Ex-Press P-CEF ACC, release the

safety inching switch (2) after every expanding process, wait until the expanding

mandrel has moved back completely, turn the pipe, then press the safety inching

switch (2) again. Repeat the expanding process until the expanding jaws (8)

are pushed into the pipe up to the stop. Read and observe the installation and

assembly instructions of the manufacturer/supplier of the used system.

3.3. Safety during operation

Functional safety

REMS Ax-Press 30 22 V ends the pressing operation automatically, emitting

an acoustic signal (clicking).

REMS Ax-Press 25 22 V ACC, REMS Ax-Press 25 L 22 V ACC and REMS

Ex-Press 22 V ACC end the pressing operation automatically, emitting an

acoustic signal (clicking) and return automatically (automatic circuit control).

Working safety

To ensure safe working, the drive units are equipped with a safety inching switch

(2). This permits immediate switching off of the drive units at any time, particu-

larly if a potential hazard arises. The drive units can be switched to the return

function in any position.

3.4. Machine status check with ﬂ at battery protection

All REMS Akku presses have been equipped with an electronic machine status

check with charging level indicator (10) with a 2-coloured green/red LED since

01/01/2011. The LED lights green when the battery is fully or still sufﬁ ciently

charged. The LED lights red when the battery must be charged. If this condition

occurs during pressing and the pressing process is not ﬁ nished, the pressing

must be completed with a fully charged Li-Ion battery. If the drive unit is not

used, the LED goes out after approx. 2 hours but comes on again when the

drive unit is switched back on.

3.5. Graduated charging level indicator (13) of the Li-Ion 21.6 V battery

The graduated charging level indicator shows the charging level of the battery

with 4 LEDs. At least one LED lights for a few seconds after pressing the key

with the battery symbol. The more LEDs that light green, the higher the charging

level of the battery. If a LED ﬂ ashes red, the battery must be recharged.

Содержание Ax-Press 25 22 V ACC









































































































































































Результаты поиска

Содержание Ax-Press 25 22 V ACC

Отзывы:

Похожие инструкции для Ax-Press 25 22 V ACC

Бренды по названию

Популярные бренды

REMS Ax-Press 25 22 V ACC, Инструкция по эксплуатации

Результаты поиска

Содержание Ax-Press 25 22 V ACC

Отзывы:

Похожие инструкции для Ax-Press 25 22 V ACC

Бренды по названию

Популярные бренды