REMS Akku-Press 22 V ACC Connected, Инструкция по эксплуатации

Страница: 21 / 392

Guidelines for use of REMS cordless tools, batteries, rapid chargers, power supply
units.
See www.rems.de → Downloads → Instruction Manuals → RADIAL PRESSES:
OTHER DOCUMENTS
1.1. Scope of Supply
Drive unit, Li-Ion 21.6 V battery, rapid charger, instruction manual, safety notes,
steel case/L-Boxx system case
1.2. Article Numbers
REMS Akku-Press 22 V ACC Connected drive unit,
without battery 576003
REMS pressing tongs, REMS pressing rings,
REMS adapter tongs see REMS catalogue
REMS M cropping tongs see REMS catalogue
REMS cable shears 571887
Cable cutter, pack of 2 (REMS cable shears) 571889
REMS Basic E01 pressing tongs 571855
REMS T 12 pressing inserts, pack of 2 570891
REMS Li-Ion 21.6 V, 2.5 Ah battery 571571
REMS Li-Ion 21.6 V, 4.4 Ah battery 571574
REMS Li-Ion 21.6 V, 5.0 Ah battery 571581
REMS Li-Ion 21.6 V, 9.0 Ah battery 571583
Rapid charger 100 – 240 V, 90 W 571585
Rapid charger 100 – 240 V, 290 W 571587
Power supply unit 220 – 240 V / 21.6 V, 15 A 571567
Power supply unit 220 – 240 V / 21.6 V, 40 A 571578
Steel case REMS Akku-Press 22 V ACC Connected 571290
L-Boxx system case REMS Akku-Press 22 V ACC Connected 576345
REMS CleanM, machine cleaner 140119
Steel case or system case with inlay for REMS pressing tongs,
REMS pressing rings, adapter tongs, as an accessory
1.3. Applications
REMS Akku-Press 22 V ACC Connected radial press for making press
fi ttings of all common press fi tting systems on
steel pipes,
stainless steel pipes, copper pipes, plastic pipes,
composite pipes Ø 10 – 108 (110) mm
Ø ⅜ – 4”
See also www.rems.de → Products → Radial Presses →
REMS Pressing Tongs, REMS Pressing Rings → Catalogue Excerpt (PDF)
1.4. Operating Temperature Range
Drive unit –10 °C – +60 °C (14 °F – +140 °F)
Battery –10 °C – +60 °C (14 °F – +140 °F)
Rapid charger 0 °C – +40 °C (32 °F – +104 °F)
Power supply unit –10 °C – +45 °C (14 °F – +113 °F)
Storage temperature range > 0 °C (32 °F)
1.5. Connected Functionality
Registered products with Connected functionality offer the user different,
additional, product-dependent functionalities such as: Recording of measuring/
pressing data (date and time of the pressing, counter 1 number of pressings and
operating time, counter 2 number of pressings and operating time, counter total
number of pressings and operating time, battery voltage, current strength on
switching off, maximum current strength, remaining battery capacity, internal
drive unit temperature, pressing time, pressure-time diagram, etc.) and creation
of reports with your own company logo, display of error messages, confi gura-
tion of the product (language, date, time, time zone, pressure unit, LED lighting
time and LED brightness, standby time, ACC drive mode, information signal
tones, etc.), set-up of usage bars (immediate bar or feedback interval as anti-
theft, time and date ranges for barring times, limitation of the number of perform-
able pressings), geolocalisation of pressing sites, conversion of voice recordings
into editable text, uploading and storing of pictures of pressings, display of
notices (annual inspection and periodic testing, new fi rmware version, battery
state, etc.), download and installation of new fi rmware versions.
Thrust force (rated force) 32 kN
Stroke 41 mm
1.7. Electrical Data
21.6 V – ---; 2.5 Ah
– –
Drive unit
21.6 V – ---; 4.4 Ah
– –
21.6 V
Drive unit Drive unit
–
---; 5.0 Ah
– –
21.6 V
21.6 V
21.6 V
21.6 V – ---; 9.0 Ah
– –
Rapid charger Input 100 – 240 V~; 50 – 60 Hz; 90 W
Output 21.6 V – ---
protective insulated, radio interference
suppressed
Rapid charger Input 100 – 240 V~; 50 – 60 Hz; 290 W
Output 21.6 V – ---
protective insulated, radio interference
suppressed
Power supply unit Input 220 – 240 V~; 50 – 60 Hz
21.6 V (art. no. 571567) Output 21.6 V – ---; 15 A
– –
protective insulated, radio interference
suppressed
Power supply unit Input 220 – 240 V~; 50 – 60 Hz
21.6 V (art. no. 571578) Output 21.6 V – ---; 40 A
– –
protective insulated, radio interference
suppressed
1.8. Dimensions
Drive unit 295 × 310 × 81 mm (11.6"×12.2"× 3.2")
1.9. Weights
Drive unit without battery 2.9 kg (6.4 lb)
REMS Li-Ion 21.6 V, 2.5 Ah battery 0.4 kg (0.9 lb)
REMS Li-Ion 21.6 V, 4.4 Ah battery 0.8 kg (1.8 lb)
REMS Li-Ion 21.6 V, 5.0 Ah battery 0.8 kg (1.8 lb)
REMS Li-Ion 21.6 V, 9.0 Ah battery 1.1 kg (2.4 lb)
Pressing tongs (average) 1.8 kg (3.9 lb)
Adapter tongs Z2 2.0 kg (4.4 lb)
Adapter tongs Z4 3.6 kg (7.9 lb)
Adapter tongs Z5 3.8 kg (8.4 lb)
Adapter tongs Z8 1.7 kg (3.7 lb)
Pressing ring M54 (PR-3S) 3.1 kg (6.8 lb)
Pressing ring U75 (PR-3B) 2.7 kg (5.9 lb)
1.10. Noise Information
Workplace-related emissions value
L
pA
= 74 dB(A) L
pA pA WA
= 74 dB(A) L = 74 dB(A) L = 85 dB(A) K = 3 dB(A)
WA WA
1.11. Vibrations
Weighted effective value of acceleration < 2.5 m/s² K = 1.5 m/s²
The specifi ed vibration emission value was measured according to a standard
test method and can be used for comparison with another power tool. The
specifi ed vibration emission value can also be used for an initial estimation of
the cut-out.
CAUTION CAUTION
The vibration emission value may differ from the specifi ed value during actual
use of the power tool depending on the manner in which the power tool is used.
Depending on the actual conditions of use (intermittent mode), it may be neces-
sary to defi ne safety measures to protect the operator.
2. Start-up
CAUTION CAUTION
After longer storage times of the drive unit, the overpressure valve must be
actuated by pressing the reset key (12) before starting up again. If this is stuck
or stiff, no pressing may be performed.
The drive unit must then be sent to an authorised REMS customer service
workshop for inspection. p f p f
The respective latest REMS sales literature applies for the use of the REMS
pressing tongs and REMS pressing rings with adapter tongs for the different
press fi tting systems, see also www.rems.de → Downloads → Product Cata-
logues, Brochures. If the system manufacturer alters components of press
fi tting systems or markets new ones, their current application status must be
enquired about at REMS (Fax +49 7151 17 07 - 110 or e-mail info@rems.de).
Subject to change and error.
2.1. Electrical Connection
WARNING WARNING
Caution: Mains voltage present! Before connecting the drive unit, the rapid
charger or the power supply unit, check whether the voltage stated on the rating
plate corresponds to the mains voltage. On building sites, in a wet environment,
indoors and outdoors or under similar installation conditions, only operate the
power tool on the mains with a fault current protection switch (FI switch) which
interrupts the power supply as soon as the leakage current to earth exceeds
30 mA for 200 ms.
Li-Ion batteries
Total discharging by undervoltage
The Li-Ion batteries may not drop below a minimum voltage because otherwise
the battery could be damaged by total discharge. The cells of the REMS Li-Ion
battery are delivered pre-charged to approx. 40 %. Therefore the Li-Ion batteries
must be charged before use and recharged regularly. Failure to observe this
regulation of the cell manufacturer can lead to damage to the Li-Ion battery by
total discharging.
eng eng
21