13
Battery low indication
The unit will detect battery status after key pressed, the LED will
flashes 3 times rapidly then stay off when battery low is detected.
Meanwhile, it will report battery low status to gateway automatically.
Physical Installation
In case you need to mount the ZRC-90 into the wall bracket, please be
sure to fully read the following precautions and procedures.
MOUNTING LOCATION PRECAUTIONS
Before mounting, check the material and structure of the
mounting location. If the location does not have the proper
material or structure, the unit can fall and cause injuries.
Use commercial items that best match the wall structure and
material for the screws and other fixtures.
Do not mount near a kitchen counter, humidifier, or other
location in which it can be exposed to smoke or steam. Doing so
could cause a fire or electrical shock.
Do not mount in locations with high humidity or large amounts of
dust. Doing so could cause a fire or electrical shock.
Do not mount to locations subject to high temperatures, high
humidity, or exposure to water. Doing so could cause a fire or
electrical shock.
Do not mount to locations subject to large amounts of vibration,
large jolts, or large forces. These could cause an injury if the unit
falls and breaks.
MOUNTING PROCEDURE PRECAUTIONS
Do not modify parts or use the unit in ways other than its
intended use. Doing so could cause the unit to fall and result in an
injury.
Be sure to fully check that there are no electrical wires or pipes
inside the wall before mounting.
If any of the screws are loose, the unit can fall and cause an injury.
Do not mount the unit with the screws still loose.
Check that the two screws mounted to the wall are fully inserted
into the key holes of the unit. Otherwise, the unit can fall and
cause an injury.
Do not mount the unit so that it sticks out from the wall edge. It
could get hit by people
’
s bodies or objects and cause an injury.
Supplier will not be liable for any accidents or injuries that occur
due to improper mounting or handling.
When mounting, be careful not to get your fingers pinched or
injure your hands.
