background image

 

 

Setup and Operations 

 
Before using the ZRC-90, please install the batteries:

 

 

2xAAA (alkaline is recommended) batteries are required for 
operation.  

 

Remove the battery cover on the back of your remote. 

 

Check the polarity of the batteries and the "+/-" marks inside the 
battery compartment. 

 

Insert the batteries.

 

 

 

Push the battery cover back in place. 

 

L

 CAUTION (battery safety)

 

Use new batteries of the recommended type and size only. 

 

Never mix used and new batteries together. 

 

To avoid chemical leaks, remove batteries from the remote 
controller if you do not intend to use the remote for an 
extended period of time. 

 

Dispose of used batteries properly; do not burn or bury them.

 

(Please carefully read through the following sections of this user 
manual and store for future reference.) 

 

 

ZRC-90 can be included and operated in any Z-Wave network with 
other Z-Wave certified devices from other manufacturers and/or 
other applications. All non-battery operated devices within the 
network will act as repeaters regardless of vendor to increase 
reliability of the network. 

 

ZRC-90 can act as a 

secondary Central Scene Controller 

and trigger 

the pre-defined scenes through the gateway. Please follow “Add ZRC-
90 into gateway network” by the procedures of “Learn mode” and 
“Scene activation and deactivation”. 
 
 

Z-Wave Learn mode 

 

ZRC-90 can also receive network information from other controllers 
by enter “Learn mode”. 
 
(Add / Remove ZRC-90 into / from gateway network) 

 

Step 

Setup Key 

Setup LED Indication 

on ZRC-90 

Refer to your primary controller
instructions to process the Inclusion
/ Exclusion setup procedure. 

Содержание Scene Master


















Отзывы: