Mounting the Roller Harrow
1. The roller sections with bearings have been factory assembled and palletized. Roller Arms and
required hardware are packed in a sturdy cardboard box.
Field Cultivator - Chisel Plow
2. Each roller section has the
size
stenciled on the end. There is an arrow cut into each inner plate
of each roller size. The
direction
of the arrow indicates the Aggressive Mode. Most mounted
roller
sections
are attached to implement in the Aggressive Mode. The arrows should face forward,
pointing towards the implement.
3. Lay the roller sections out behind the implement. Reference additional layout sheet for proper
location of each roller section. Mount the extension arms to the rear frame of the tool. Use the
5/8”-11 x 6 1/2” hex cap bolts
and mounting plates. The Roller mounting arm is then attached
directly to the extension arm. Use the
5/8”-11 x 2” hex cap bolts
. Recommendation is to leave
mounting arms slightly loose, this allows left to right movement for the mounting arm until roller
frame is attached to each pair of arms.
Manual # - MAN-SRH-DFC-004
5
Remlinger Mfg reserves the right to change pricing or specifications at anytime without notice or obligation
1-800-537-7370
