Recommended Torque Specifications
SAE Grade No.
5
8
Bolt Head
Identification
Bolt Size
Lb - Ft
N - m
Lb - Ft
N - m
1/4”
9 - 11
12 – 15
12 - 15
16 - 20
5/16”
17 - 20.5
23 – 28
24 - 29
33 - 39
3/8”
35 – 42
48 - 57
45 - 54
61 - 73
7/16”
54 – 64
73 - 87
70 - 84
95 - 114
1/2”
80 - 96
109 - 130
110 - 132
149 - 179
5/8”
150 – 180
203 - 244
220 - 264
298 - 358
3/4”
270 – 324
366 – 439
380 - 456
515 - 618
7/8”
400 – 480
542 – 651
600 - 720
814 - 976
1”
580 - 696
787 – 944
900 - 1080
1220 - 1464
1-1/8”
800 – 880
1085 – 1193
1280 - 1440
1736 - 1953
1-1/4”
1120 – 1240
1519 – 1681
1820 - 2000
2468 - 2712
1-3/8”
1460 – 1680
1980 – 2278
2380 - 2720
3227 - 3688
1-1/2”
1940 - 2200
2631 – 2983
3160 - 3560
4285 - 4827
Maintenance
Roller Bearing Lubrication
Replacement Parts
• Use a #2 multipurpose lithium grease on the bearings at least once a season or every 150
hours. Pump grease in
SLOWLY
until old grease and dirt are forced out around seals.
Bearings are shipped pre greased for initial use.
• Before and after each use of the roller attachment thoroughly look over your attachment for
any worn, loose, stressed parts. Preventative maintenance can save time and expense to the
attachment if issues are found before heading to the field.
It is best to lubricate bearings just prior to prolonged storage. The grease fitting is a press-in
style not a threaded spin-in. Worn fittings may prevent bearings from taking grease.
!
Manual # - MAN-SRH-DFC-004
12
Remlinger Mfg reserves the right to change pricing or specifications at anytime without notice or obligation
1-800-537-7370
