REMKO RVS 130 DC, Инструкции по эксплуатации и монтажу

Страница: 15 / 44

Malfunction indication
If a fault arises on the unit, the controller reports this automatically. The screen shifts to the fault display
and displays a fault code. The meanings of the various codes are listed in the
Faults and fault causes chapter.
If multiple faults arise at the same time it is possible to switch between the fault displays with the and
keys.
You can return to the start screen by briefly pressing the key.
If there is no activity for 10 seconds, the display automatically returns to the fault display.
If the fault is rectified, the controller will detect this and the fault display will disappear automatically.
If a major fault arises 3 times within a 30 minute period, the fault message must be manually reset after the cause
of the fault has been successfully removed.
A listing and definition of the major faults can be found in the Faults and fault causes chapter.
Once the cause of the fault has been removed the fault message must be manually reset by pressing the key
for 2 seconds.
15