Individual control
Controller
provided by
the customer
CBCS
Shutdown
Temporary shutdown
1.
Let the unit run for 2 to 3
hours in circulation mode, or
in cooling mode at maximum
temperature, to extract any
residual humidity from the unit.
2. Shut down the system using the
controller.
3. Switch off the power supply to
the unit.
4. Check the unit for visible
signs of damage and clean as
described in the chapter "Care
and maintenance"
Shutdown for an indefinite
period
Ensure that units and components
are disposed of in accordance with
local regulations, e.g. through
authorised disposal and recycling
specialists or at collection points.
REMKO GmbH & Co. KG or your
contractual partner will be pleased
to provide a list of certified firms in
your area.
Care and maintenance
Regular care and maintenance
ensure the trouble-free operation
and long service life of the unit.
Care and maintenance work
may only be carried out if
the unit is disconnected from
electrical power.
CAUTION
Care
■
Ensure the unit is protected
against dirt, mould and other
deposits.
■
Clean the unit using a damp
cloth. Do not use any caustic,
abrasive or solvent-based
cleaning products. Do not use a
jet of water.
■
Clean the fins on the unit prior
to long shutdown periods.
Maintenance
■
We recommend that you take
out a maintenance contract
with an annual service interval
with an appropriate specialist
firm.
Cleaning the housing
1. Disconnect the power supply to
the unit.
2. Clean the grill and cover with
a soft, damp cloth.
3. Switch the power supply back
on.
Air filter for indoor unit
Clean the air filter at intervals of
no more than 2 weeks. Reduce this
interval if the air is especially dirty.
A maintenance contract will
guarantee that your system
always operates reliably!
TIP
Filter removal
In certain types of use the units
and components are subject to
a special hygiene maintenance
and inspection requirement.
NOTE
7
Group activation
Switching relay
Controller
provided by
the customer
CBCS
Содержание KWK 100-4R
Страница 2: ......
