REMKO ATR-Smart-Basic, Руководство по эксплуатации

Страница: 34 / 44

3.3 Management of the
GPC Smart Processor
This menu provides access to the GPC Smart Pro-
cessors of each unit connected to the remote con-
trol. All parameters of each GPC processor can be
displayed or modified, the faults of each unit and
their main operating states can be displayed, as
well as the measurements of the NTC sensors
connected to the GPC processors of each unit.
The "CPU Smart" menu can be accessed via the
"DISPLAY CPU Smart" key in the "HOME"
main menu. On this screen, the units for which the
network is configured appear in one line each, with
the address set on the GPC Smart Processor as a
number in column "N", the type of error that
occurred (column "Cod"), the number of network
failures (column "Tout") and the operating status of
the unit (column "M", see section Ä ‘Checking the
burner operation’ on page 28 ).
When querying any connected GPC Smart Pro-
cessor, the corresponding submenu with the fol-
lowing options is displayed:
n Reset malfunctions
n Visualisation parameters
n Read/write parameters
10:15 CPU-Smart
N. Cod Tout M
01 F21 0008
02 === 0000
03 === 0005
OK
RST
TOUT
N. 02
10:15 CPU - 2
Reset Störungen
Parameter Visualisierung
Parameter schreiben/lesen
10:15 HOME
SET: 18°C
20.0
°C
OK
000 %
!
Mon 01 Jan
Mon 01 Jan
Mon 01 Jan
Reset malfunctions
Read/write parameters
Visualisation parameters
Fig. 31: Setting the GPC Smart processor
REMKO room temperature controller
34