REMKO ATR-5, Руководство пользователя, Страница: 7 / 20

7
Hand key
The key is used to modify the
current temperature level in automatic
operation.
The selected temperature level is
displayed on the right-hand side of the
display with the indicators.
This function is deleted with the next
program point.
Off
The controller is switched off by
simultaneously pressing the
¹ and

program keys.
The operating mode is no longer
displayed on the right-hand side of the
display. The unit continues to record the
actual temperature, however the switch
relay for temperature regulation is no
longer activated.
Frost protection is no longer available.
CAUTION
The holiday program is not
available in cooling mode.
NOTE
Frost protection is always assured
when the unit is active as the
temperatures cannot be set lower
than 5°C.
Reset key
Two different resets are possible:
1. Start-up reset:
The Reset [4] key allows the unit to be
started up again in the event of a failure
due to a malfunction.
The program and parameter settings are
retained.
The clock will need to be set again.
2. Global reset:
In order to force the unit to start up with
factory settings, the
– and PROG keys in
addition to RESET [4] must be pressed.
After releasing the
RESET key, the – and
PROG keys must continue to be pressed
until the version number (Id:00...)
appears on the display.
Any previously entered individual
time program and parameter set-
tings will be lost.
NOTE
NOTE
In the event that a temperature
probe is faulty or missing, "
FA IL "
appears on the display.