REMKO ATR-5 Скачать руководство пользователя страница 6

6

REMKO ATR-5

Nighttime temperature

The nighttime temperature is adjusted 
with the lower adjustment button [1].  
It is displayed in the right-hand half of 
the display as an absolute value. The 
unit displays the actual temperature 
again automatically three seconds after 
the last rotation of the button.  
The current setpoint can be requested by 
pressing the 

SET

 program key. 

The actual temperature is displayed 
again automatically after three seconds.

Daytime temperature

The desired temperature (5 to 40°C) 
is adjusted with the upper adjustment 
button [2].  
This is displayed in the right-hand half 
of the display in place of the actual 
temperature.  
The unit displays the actual temperature 
again automatically three seconds after 
the last rotation of the button.

Holiday program

The holiday program can be set to 
between 5°C and 15°C in the control 
parameters menu.  
The temperature can be selected by 
simultaneously pressing on the two 
program keys 

 

and  .

If the holiday program is activated in 
cooling mode, an internal, fixed set 
target temperature of 45°C is used for 
the control, which normally prevents 
the connected cooling device being 
activated.

The mode is indicated via an indicator 
[6] on the left edge of the display 
depending on the selected basic function 
"Heating or Cooling".

Display with switched "Heat" output

Display with switched "Cool" output

The changeover of the "Heat/Cool" 
functions is implemented manually in  
"

H C

" operating mode. 

In "Heat" mode, the switching function 
is displayed on the left-hand side of 
the display with an upwards pointing 
arrow (

) and in "Cool" mode, with a 

downwards pointing arrow (

).

 

 

 

MO DI MI DO FR SA SO

      NOTE

A change in the daytime 
temperature also results in the 
nighttime temperature being 
changed by the same amount 
because the nighttime temperature 
is coupled to the daytime 
temperature. Conversely, a change 
to the nighttime temperature 
does not necessitate a change in 
the daytime temperature (see the 
example on page 15 too).

s

s

s

Содержание ATR-5





















Отзывы: