REMKO ATR-5 Скачать руководство пользователя страница 4

4

REMKO ATR-5

Carefully read the operating manual 

before placing the unit in service for the 

first time. 

It provides useful tips and notes   as 

well as hazard warnings to prevent injury 
and material damage   . 

Failure to follow the directions in this 

manual can endanger the equipment 

itself and will void any claims for liability.

This electronic temperature controller 

provides room temperature dependent 

regulation of heating and cooling units 

in enclosed spaces.

■ 

Keep this manual close to the unit

■ 

Only qualified authorised personnel 

may assemble and install the units 

and components

■ 

The units must be set up, connected 

and operated in accordance with the 

manual and the generally applicable 

regulations, including any regional 

regulations 

■ 

Modification of the units and 

components supplied by REMKO 

is not permitted and can cause 

malfunctions

■ 

Units may not be used in areas where 

there is an increased risk of damage.

Safety notes

Environmental 

protection and recycling

Disposal of packaging

All products are packed for transport 
in environmentally friendly materials. 
You can make a valuable contribution 
to reducing waste and to sustaining raw 
materials by only disposing of packaging 
at approved collection points. 

Disposal of old equipment

At the end their service lives, the units 
must not to be disposed of in household 
waste. They must be taken to a special 
collection point for electrical and 
electronic units.

Directive 2002/95/EC

Directive 2002/96/EC

CAUTION

Copyright

The redistribution, even in part, 
or the use of this documentation 
for purposes other than intended 
is prohibited without the written 
authorisation of

REMKO GmbH & Co. KG

.

Intended use

In timer mode the weekly timer controls  
the day and night temperatures.Any 
different or additional use shall be classed 
as non-intended use. The manufacturer/
supplier assumes no liability for damages 
arising from non-intended use.  
The user bears the sole risk in such cases. 
Intended use also includes working 
in accordance with the operating 
instructions.

Содержание ATR-5





















Отзывы: