REMKO 1609240, Инструкции по эксплуатации и монтажу

Страница: 9 / 32

3 Design and function
3.1 Unit description
The local room air conditioner consists of a com-
pact housing and 2 exhaust air ducts to remove or
supply heat.
The condenser built into the unit is used to pass
the heat removed from the room to the outside air
when in cooling mode. In heating mode, the heat
received via the evaporator is released into the air
in the room to be heated via the condenser. In both
operating modes, the compressor adjusts its power
exactly to the requirements and thereby regulates
the setpoint temperature with minimal temperature
fluctuations. Thanks to this inverter technology
energy is saved compared to conventional room
air conditioners and the noise emissions are
reduced to a particularly low level.
The air conditioner is designed to be located
indoors near the bottom of the wall. It is operated
by an infrared remote control or via the integrated
touch display.
The air conditioner consists of a compressor, evap-
orator and condenser in a lamella design, evapo-
rator and condenser fans as well as the controller
and condensate tray.
A
B
C
D
E
Fig. 2: Unit function
A: Inside air inlet
B: Inside air outlet
C: Outside air inlet
D: Outside air outlet
E: Condensate drain
9