REMKO 1609240, Инструкции по эксплуатации и монтажу

Страница: 15 / 32

8. Install the wall bracket with sufficient screws
to guarantee a secure hold.
A
A: Inside
9. Fold the outside panels together and insert
them through the drill hole. Align the panel
and place the inside panel. If necessary, the
inside panel can also be screwed to the
inside wall. Tighten the chain of the outside
panel and hook it into the inside panel at the
desired length. Cut off the excess length of
the chain. Repeat the process for the second
drill hole. The outside panels are equipped
with non-return flap valves. Pay attention to
the direction of the air flow when installing
(see fig. below).
A
B
B
A: Outside wall
B: Inside wall
10. Suspend the unit on the wall-mounted
bracket and check the alignment of the unit.
Pay attention to the connection of the con-
densate hose and to the electrical power
supply. Fasten the lift protection bracket to
the wall beneath the unit.
A
A: Inside
11. Loosen and remove the wing nuts on the
underside of the unit to remove the transport
lock.
15