REMKO 1609240, Инструкции по эксплуатации и монтажу

Страница: 24 / 32

10 Shutdown
NOTICE!
Never switch off the equipment by pulling out
the mains plug.
Temporary shutdown
If it is planned to shut down the unit for longer
periods e.g. during the winter, proceed as follows:
1. Let the unit run in recirculating operation for
approx. 2 hours in order to dry the surfaces
of the evaporator fins. This will transport the
remaining moisture out of the unit and this
will avoid unpleasant odours when the unit is
re-commissioned.
2. Switch off the unit using the "ON/OFF" key,
pull out the power plug and wind up the
power supply cable. Ensure that the cable is
not kinked or too severely bent.
3. Place a suitable container underneath the
condensate drain of the internal reservoir.
The condensate drain is located on the
underside of the unit.
4. Pull out the stopper from the condensate
drain and collect the condensate that drains
out.
5. Then insert the stopper once again. A
missing stopper or an incorrectly inserted
stopper will result in condensate leaking out
after re-commissioning.
6. Store the unit in an upright position in a cool,
dry and dust-free location protected from
direct sunlight. Cover the unit with a synthetic
cover to protect it against dust if desired.
REMKO series KWT
24