REMKO 1609240, Инструкции по эксплуатации и монтажу

Страница: 12 / 32

8
" " key - "Recirculation" mode
Recirculation mode is activated by holding down
this key.
9
" " key - Night mode
Night mode is activated by pressing this key.
Cooling mode:
The temperature set is increased by 1 °C after 1
hour and a further degree after 2 hours. After the
second hour, the temperature no longer changes
and after a further 6 hours the unit goes into
standby mode.
Heating mode:
The temperature set is lowered by 1 °C after 1
hour and a further degree after 2 hours. After the
second hour, the temperature no longer changes
and after a further 6 hours the unit goes into
standby mode.
The function can be deactivated again by pressing
the key again.
10
“ ” key - Swing function
Pressing this key activates the Swing function. The
discharge fin can be oscillated and locked to the
desired position by pressing the key again.
11
" " key - Timer -
It is possible to activate the timer function using
this key.
By pressing this key with the unit deactivated, it is
possible to automatically start the unit after the
time set.
It is also possible with the unit active to automati-
cally stop the unit after the time set using this key.
The time can be adjusted with the arrow keys (“ ”
and “ ”) in a range of 1 to 24 hours.
After the desired time has been set, the input can
be confirmed by pressing the timer key again.
If the timer key is held down for 3 seconds, key
lock is activated. All inputs by the user are pre-
vented with key lock active. Key lock can be deac-
tivated by holding down the timer key again for 3
seconds.
12
" " key - Hotel mode
Hotel mode limits the adjustment range in cooling
mode from 22 °C to 28 °C and in heating mode
from 16 °C to 24 °C. The automatic function is also
deactivated.
After holding the key down for 10 seconds, hotel
mode can be activated (En) or deactivated (dS)
with a quick press. The display returns after 5 sec-
onds and stores the settings.
A quick press of the key on the base screen does
nothing.
13
Digital display
The current set temperature is displayed in normal
operation on the digital display. The display is also
used for further function settings and for displaying
error codes in the event of a fault.
14
Graphical temperature display
The graphical temperature display shows the
approximate ambient temperature using 7 bars
and lights up either red (heating) or blue (cooling)
in the respective operating mode. The temperature
display also makes a sliding motion when boost
mode is active.
REMKO series KWT
12