Remington iLIGHT Ultra, Инструкция по использованию и уходу

Страница: 44 / 108

44
Troubleshooting
PROBLEM POSSIBLE
CAUSE
WHAT YOU SHOULD DO
The outer ENERGY
LEVEL SELECTION
DISPLAY lights are
flashing alternately
and the Remington
iLIGHT Ultra Face &
Body device is beeping
every ½ second. The Remington
iLIGHT Ultra
Face & Body
device isn’t
working
properly.
Contact Customer Service for help.
See page 48.
The second and
fourth ENERGY
LEVEL SELECTION
DISPLAY lights are
flashing and the
Remington iLIGHT
Ultra Face & Body
device is beeping.
The SKIN
CONTACT
SENSORS may
be stuck.
Lift the HAND PIECE from the BASE UNIT and
check the SKIN CONTACT SENSORS. The SKIN
CONTACT SENSORS should slightly protrude
from the sides of the HAND PIECE window.
You should be able to press the SKIN CONTACT
SENSORS down so that they are flush with the
HAND PIECE FLASH WINDOW and they should
spring back to about 2mm when released.
If the SKIN CONTACT SENSORS do not depress
or spring back, they may be stuck and may
require cleaning. See "After Your Remington
iLIGHT Ultra Face & Body Treatment" in the TOC
for instructions on how to clean your device.
If you still can't get it working, contact Customer
Service for help. See page 48.