Remington iLIGHT Ultra, Инструкция по использованию и уходу

Страница: 42 / 108

42
Troubleshooting
PROBLEM POSSIBLE
CAUSE
WHAT YOU SHOULD DO
A light flash
is not emit-
ted when
I press the
FLASH
BUTTON.
The SKIN
CONTACT
SENSORS are
not in full con-
tact with the
skin.
Check that both SKIN CONTACT SENSORS are
touching your skin. The Remington iLIGHT Ultra
Face & Body device won’t work unless it’s flat
against your skin. See steps 2b-2f in Figure 5
for this situation.
You have not
waited enough
time between
flashes for the
Remington iLIGHT
Ultra Face & Body
bulb to recover.
The Remington iLIGHT Ultra Face & Body device
requires 3 seconds to recover between flashes.
When the device is ready to flash (and assuming
the SKIN CONTACT SENSORS are flush against
the skin), the device will emit three “BEEPS” to
confirm that it is ready to flash. See steps 2b-2f
in Figure 5 for this situation.
The
REPLACEMENT
CARTRIDGE
has flashed
65,000 times
and needs to be
replaced. You
should see the
Light Bulb flash-
ing YELLOW.
Make sure that the CARTRIDGE STATUS INDICATOR
DISPLAY is either solid green or solid yellow. If
it is flashing yellow, disconnect the Remington
iLIGHT Ultra Face & Body device and replace the
REPLACEMENT CARTRIDGE. Refer to “Replacing the
REPLACEMENT CARTRIDGE” in Figure 7.