Remington iLIGHT Ultra, Инструкция по использованию и уходу

Страница: 34 / 108

34
Changing Treatment Caps
The Facial Cap is specially designed to
treat female facial hair, as it minimizes
light leakage, and can flash every 4 sec-
onds. The Facial Cap is marked with the
icon below:
To change treatment caps, please follow
the instructions provided.
1. Turn the POWER SWITCH off and
unplug the POWER CORD from the elec-
trical outlet.
Allow the system to cool down for 5
minutes before attempting to change
TREATMENT CAP.
2. Hold the TREATMENT CAP with one
hand while pressing both TREATMENT
CAP RELEASE BUTTONS with the
other hand and pull gently. Store the
unused TREATMENT CAP in a safe
location (such as in the packaging)
taking care not to damage the FLASH
WINDOW and other components.
3. Gently push the other TREATMENT CAP
back into the HAND PIECE making sure
both side tabs click into place. NOTE: the
longer tab (with gold circuits) must be on
top to properly fit.
Helpful tips for treating facial hair
• Test on a patch of skin. See Table 2.
• Use a mirror to guide your Treatments
– using a mirror for a good view of
the area to be treated and to help
ensure you avoid treating the lips or
any other dark spots. If the reflected
light is unpleasant, you may want to
close your eyes before each flash.
• Stretch skin for better skin contact –
the contours of the skin may make
it difficult for the SKIN CONTACT
SENSORS to be fully depressed in
certain areas. You may find it easier to
try and wrap your upper lip over your
teeth or use your tongue to stretch
your cheeks for better skin contact.