Remington iLIGHT Ultra, Инструкция по использованию и уходу

Страница: 29 / 108

29
Using the Remington
®
iLIGHT
®
Ultra Face & Body Hair Removal System for Treatment
STEP 5: TREAT YOUR SKIN
The Remington iLIGHT Ultra Face & Body
device can flash approximately every
3 seconds and is ideal for treating both
larger and smaller areas.
Periodically, if either the hand piece or
base unit gets too hot, the ‘Hourglass’
icon will flash and the unit will beep.
Wait for a few minutes to allow the
device to cool down. There is no need
to shut the unit down, as the hour-
glass and beeps will turn off when
the device is ready to use again. The
number of flashes delivered before
the cool down state depends on sev-
eral factors, including how fast you
apply the treatments, and the room
temperature. See Figure 6.
5a.
Ensure that the energy level is on
the correct setting. See Table 2 for
details about the different settings.
5b. Apply the TREATMENT CAP to
the skin, making sure the skin is
spread evenly and smoothly. Make
sure the SKIN CONTACT SENSORS
on the TREATMENT CAP are in full
contact with the skin.
SKIN CONTACT SENSORS
Figure 6