4
CHARGING
• Before using your hair clipper for the first time, charge it for 24 hours.
NOTE:
During this charge ignore the electronic indicators as they are in “start-up cycle”.
• Plug the adaptor into your hair clipper and then plug the charging adaptor unit into the power
outlet. Check to ensure that the clipper On/Off button is OFF. The Charging Indicator Light
will glow to indicate that it is charging. Alternatively, this hair clipper can be charged via any
USB port on a PC or USB compatible plug. Do not run the product when charging via USB.
• The batteries cannot be overcharged, but it is recommend that charging be discontinued and
the hair clipper stored away if it will not be used for an extended period of time (2-3 months).
• The hair clipper will be fully charged in 4.5 hours.
• To preserve the life of the batteries, discharge them by running the hair clipper until the
blades move slowly. Switch off and recharge for 24 hours. Do this every 6 months.
• Use the hair clipper only with the charging adaptor supplied.
• It is advisable not to use this hair clipper directly from the power outlet when it has been fully
charged, but if while using the hair clipper in cordless mode there is a noticeable drop in
power, you can use directly from the power outlet.
USB
• Connect your USB cable to the USB port on your power source.
• Connect the USB cable to your appliance.
NOTE:
Charging may take longer when charging via USB.
CORDED USE
• Connect the charging adaptor to the product then to the mains.
• When the cord is connected to the mains, a digital display will be displayed on the hair clipper
WARNING:
The hair clipper cannot be operated in corded mode while connected to a PC via the
USB port.
CORDLESS USE
When the unit is switched on and fully charged, the product can be used in cordless mode for
up to 120 minutes.
HOW TO USE
TO ATTACH THE ADJUSTABLE COMBS
• Hold the comb with its teeth upward.
• Slide it onto and along the clipper blade until the front of the comb firmly sits against the
clipper blade.
TO REMOVE THE ADJUSTABLE COMBS
Holding the clipper with the blades facing away from you, firmly push the comb upward and away
from the blades.
INSTRUCTIONS FOR CUTTING HAIR
For even cutting, allow the comb attachment/blade to cut its way through the hair. Do not force it
through quickly. If you are cutting for the first time, start with the large adjustable comb.
STEP 1 – Nape of the neck
• Using the medium adjustable comb, set the comb to 3mm or 6mm.
• Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of the
head at the base of the neck.