REMET CNC RS-120 OFF-ROAD, Техническая и движущая документация, инструкция по эксплуатации, гарантийный талон, каталог запасных частей

Страница: 47 / 52

REMET CNC TECHNOLOGY SP. Z O.O.
Page 47 of 51
Manufacturer of machinery and equipment, machining
10. DISPOSAL AND ENVIRONMENT PROTECTION
Dispose the device, accessories and packaging in accordance with
environmental protection requirements at specialist disposal points.
the device must not be disposed of with household waste. Protect the
environment. The device should be returned to a local recycling point. Disposal is
free. You can get more information at the disposal point. Incorrect disposal may
be punished in accordance with local regulations.
11. SOLUTIONS FOR EXAMPLE PROBLEMS
Problem Possible cause Solution
The engine is not
working
No fuel
Top up the fuel in the
tank and check the fuel
line from the tank to the
carburetor
No ignition
Check power cords and
spark plug condition
The safety switch is
locked
Set the safety switch to
ON.
The woodchipper does
not pull the branch
The cutting roller is
blocked by material
Turn off the engine,
remove the blockage if
possible
Branches are not cut
correctly
Cutting knives are not
correctly set or damaged
In compliance with safety
requirements, check the
condition of the knives or
adjust the position of the
cutting knives according
to the diagram in section
8
"Squeaks" can be heard
during work
The drive belts are not
worn or not properly
tensioned
Check the condition of
the belts in case of wear,
replace and properly
tension using adjustment
screws at the base of the
engine