16
- The injudicious use of the clamp, and not succeeding all indications which are
stated in the users manual.
- When maintenance and/or revision has not been carried out by an authorised
REMA distributor.
The producer is not responsible for incidental damage or damage due to use of
the lifting tools as well as from violation of this manual.
11b PROCEDURE SAFETY INSPECTION
All inspections and repairings must be written down in the maintenance diagram.
This counts not only for your own inspections but also for inspections which are
carried out by your authorised REMA distributor. When the clamp is handed in for
maintenance and inspection you always must provide the maintenance diagram.
Defective Lifting Clamps
When a form of wear or damage is indicated, you must take the following
measures.
1 Take the lifting clamp out of use. (Note the date of failure of the lifting clamp)
2 Try to recover the cause of the failure, for example (complete list is available in
chapter 1):
- Overload
- Wrong and/or carelessly use
- etc
These claims stated in no.2 do not fall under the guarantee! To guarantee the
security of
you and your colleagues you are obliged to follow up this procedure.
3 Return your lifting clamp (with the maintenance history) to your authorised REMA
distributor.
4 If the lifting clamp has been revised / repaired by your distributor, you can safely
use your clamp again. Please note this date in your maintenance chart (see
page 31).
Содержание TLM77 CNM Series
Страница 1: ...Plate clamp series GEBRUIKERSHANDLEIDING GEBRAUCHSANLEITUNG MODE D EMPLOI OWNER S MANUAL...
Страница 16: ...17...