REMA TLM77 CNM Series, Руководство пользователя

Страница: 14 / 28

15
1O.TROUBLESHOOTING CHECKLIST
Malfunction or problem Possible cause Action
Load is slipping
Dirty load
Lifting shackle and chain
deformed
jaw is open and bent
Clean load
Do not use clamp
Do not use clamp
Housing is deformed Clamp is overloaded Do not use clamp
Lifting shackle is oval Clamp is overloaded Do not use clamp
Spring defective Spring worn out Have clamp serviced
Pins are bent or worn Clamp is overloaded Do not use clamp
Retaining pins are missing Incorrect assembly
Mount new
retaining pins
Difficult to open/close clamp
Clamp is worn
Clamp is dirty Do not use clamp
Clean clamp
11 WARRANTY
REMA HOLLANDprovides a 5 year warranty on its lifting clamps. This warranty is
applicable to the original end user of the lifting clamps. Only if the clamp has been
inspected, checked and maintained by this instructions and by an official dealer.
This warranty period of 5 years is valid from the day of purchase, and is liable to all
conditions and measurements stated in this document.
11a CONDITIONS
This warranty only covers failures in the lifting tools which is the consequence of
production
errors which occur during normal use. The warranty covers no wear to components
such as pivots, cam assemblies, lock springs etc. Should there be any kind of failure
within this guarantee period, the lifting tool will be replaced or repaired to insight
of the producer. No warranty is given to clamps due to the following failures:
- Regular wear
- Overload.
- Wrong and/or carelessly use
- Damages
- Not following procedures and measures
- Hoisting differing material other then indicated on clamp or stated in the user-
manual
- Adapting and/or modifying of the REMA clamp.