9
HOSES AND FITTINGS
There exists the potential for shock in using anything other than
certi
fi
ed non-conductive hoses and hydraulic oil with dielectric
properties, when using system components near energized electrical
lines. Failure to recognize these conditions could cause electrocution.
Hoses and fittings used with this tool must comply with S.A.E. J1273
which
covers recommended practice for selection, installation, and maintenance of hose and
hose assemblies. The
correct hoses and fi ttings are available from your supplier.
WARNING:
Failure to comply with these warnings could result in severe bodily injury or death.
WARNING
UNIT/HOSE CONNECTIONS
ALWAYS DISCONNECT
pump/power source and turn the key to the
OFF
position before connecting or disconnecting any components.
ALWAYS DEPRESSURIZE
hydraulic system, before connecting
or disconnecting any of the systems components.
ALWAYS TIGHTEN COUPLINGS COMPLETELY.
Loose or
improperly connected couplings may not allow
fl
uid to pass through
the hose creating a blockage in the supply or return line.
ALWAYS INSPECT HOSES AND CONNECTORS
before connection
to tool. Replace or repair if any leakage is evident. Leakage is a sign
of deterioration in component parts.
Connect hoses and confi rm proper fl ow direction to & from tool.
WARNING
SERIOUS BURN HAZARD
HOT SURFACES MAY CAUSE SERIOUS BURN INJURY
The hydraulic motor may be hot during and after operation.
CAUTION: HYDRAULIC FLUID MAY CAUSE SERIOUS BURNS
Never disconnect tool, hoses, or
fi
ttings while the hydraulic power
source is running or if the hydraulic
fl
uid is hot.
WARNING
IF YOU HAVE ANY QUESTIONS REGARDING THE SAFE USE
AND/OR OPERATION OF THIS TOOL, CONSULT YOUR AREA SUPERVISOR,
OR CONTACT RELIABLE EQUIPMENT AT 800-966-3530