4
The
RELIABLE
REL-TP3
Hydraulic Trash Pump
is lightweight, yet capable of moving high volumes
of water, and solids (sand slurries, gravel, and
sludge) up to 3 inches (75 mm) in diameter and
30% by volume.
The
REL-TP3
pump is fully submersible, self
priming, and may be run dry, without damage to
the motor, bearings or impeller.These urethane
pumps have a history of pumping sand, gravel,
concrete, and even mortar slurries without issue.
The
REL-TP3
is even able to pump petroleum
products without issue.
The urethane bowl and impeller are extremely
durable and light weight. Hard and sharp materials
bounce off instead of abrading the interior surfaces,
making this design last longer and perform better
than aluminum, iron and even steel pumps.
The high volume impeller is complimented by a
3” (75 mm) inlet and outlet to make the
REL-TP3
one of the most productive pumps on the market.
This unit is capable of pumping over 450 gpm
(1,688 lpm) at a 10 ft. (2.54 m) head from any
2,000 psi (HTMA Type ll) hydraulic source using
only 9 gpm (34 lpm) of hydraulic flow.
The top cover is attached to the volute with
six large wing nuts making routine cleaning,
inspection and maintenance
FAST & EASY
.
The convenient
Split Handles
provides a well
balanced lift.
The
REL-TP3
Trash Pump can be paired with the
REL-HPU-2000
Hydraulic Power Unit to make a
Powerful Portable Combo
for high volume trash
pump and dewatering applications.
Consult your local Reliable representative for
more “
Tooling Solutions
” available from
Reliable Equipment & Service Co., Inc
.
301 Ivyland Road • Warminster, PA 18974
Phone: 800-966-3530
• Fax: 215-357-9193
Visit us on the web at www.Reliable-Equip.com
Capacity
................ 475 gpm (1,800 lpm)
Discharge Dia.
...... 3 in. (75 mm) Fem Pipe Thd
Inlet Dia.
................ 3 in. (75 mm)
Pressure
............... 2,000 psi (140 bar)
Flow
...................... 7–9 gpm (26–34 lpm)
Porting
.................. #10 SAE (pressure)
................................ #12 SAE (return)
Connections
......... 1/2 in. Male Pipe (
Pressure
)
................................ 1/2 in. Male Pipe (
Return
)
Height
................... 13 in. (33 cm)
Length
................... 14 in. (35.5 cm)
Width
..................... 16 in. (41 cm)
Weight
................... 30 lbs (13.6 kg)
SPECIFICATIONS
REL-TP3
-
3” Trash Pump