Tank
Do not
fi
ll above marked
fi
ll
line; do not move without the lid
securely clasped and the gasket
in place.
Crumb Tray
Ensure the crumb tray is
present and clean.
Do clean crumb tray
and inside tank.
Turn the pump handle
only clockwise.
Don’t
fi
ll with
water or use
to drain boilout solu-
tion.
Don’t move without
the handle bolted in
place.
Don’t use
without
the crumb tray.
Don’t over
fi
ll.
Don’t move with the
lid unlatched.
Don’t leave oil in the
tank.
DO’S
DON’TS
USING AN SDU
See assembly, initial setup on back page
• Place the open tank under
the drain valve or drain exten-
sion of a fryer. Ensure the fryer
is off and the oil is no more
than 100°F.
• Slowly open the drain valve.
Fill only to the
fi
ll line on the
tank. Drain only one vat at a
time.
• Close and secure the lid of
the SDU. Roll it to the disposal
site. Rotate the pump’s spout
by lifting the spout locking
pin. Locate the spout over the
disposal vessel.
• Turn the crank clockwise to
dispose of the oil.
819-6794
3/11
Pump Handle
Turn clockwise only to
dispose of oil.
SDU 50/90
Spout
Locking
Pin
Release to
pivot spout
toward dis-
posal vessel.
Handle
Locking
Bolts
Ensure bolts are in
place before mov-
ing the SDU.
