THERMOJET
®
G3000E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740122
Rev
14
Date
JUNE 2020
Page
58
of
104
Once electrical power has been removed and locked out from the unit, open the electrical terminal enclosures
for the oil heater and disconnect the power wires from the terminals. Remove the cap from the first conduit
elbow adjacent to the heater enclosure and pull all of the conductors through the conduit so that they are out
of the way of the conduit union. Loosen the conduit union and separate the two halves of the fitting so that the
heater bundle can be removed.
WARNING
Use suitable transport equipment for removing the
heater bundle from the heater vessel, lifting and
re-installing the heater into the heater vessel.
Ensure that the heater is secured prior to and
during lifting and transport. Stand clear of the all
equipment while being maneuvered. Crane and
fork truck operators should be properly trained in
their operation.
Heater approximate weight is 185 pounds (84 Kg)
Oil heater terminal enclosure
Remove the cap from the elbow and
pull the conductors through the fitting
Conduit union
