THERMOJET
®
G3000E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740122
Rev
14
Date
JUNE 2020
Page
20
of
104
Nitrogen Inlet Connection
The nitrogen supply inlet connection is 3/8” FNPT. The plant’s nitrogen supply line should be equal to or
larger than the 3/8” FNPT connection. The nitrogen supply pressure requirement is 30 PSIG (2 bar) and
must be capable of supplying minimum continuous flow rate of 200 liter/minute (7 CFM). During operation
the pressure regulator is set at 15-30 PSIG (1 to 2 BAR) to control the flow of the nitrogen supply into the
jet mixer.
Maximum nitrogen supply pressure is 10.3BAR (150 PSIG).
Ensure that the Nitrogen supply pressure is
OFF prior to making a tapped connection. The
source should be equipped with a block valve.
WARNING
Nitrogen Connection
3/8” NPT
