Doc ID: 191-6305A
Doc Rev: 101818
Pg. 9
INSTALL THE CLUTCH PACK
Notes for installation
•
Some friction disks are marked with a small colored dot. This
mark is used for processing and can be ignored.
•
Inspect the clutch basket for notching. Do not install sleeves
or use product with a notched basket. Notched basket tang
faces can cause the sleeves to break. Do not use baskets that
have been filed, machined, or modified on the tangs. Replace
basket if necessary.
Failure to inspect the basket and replace if necessary could
result in death, serious injury, and/or property damage.
•
Some OE basket have “half slots” at the top of the basket
tangs. Rekluse products require the entire clutch pack be
installed into the MAIN (deeper) basket slots. Installing the
pack in the “half slots” will cause performance issues. See the
following picture for reference
.
Do not use
the “half-
slots”
Use only
the deeper
basket
slots for
installation
