Pg. 12
Doc ID: 191-6305A
Doc Rev: 101818
6. Reinstall the OE throw-out and pressure plate, followed by the
pressure plate springs and bolts.
7. Torque the pressure plate bolts in a star pattern to OE
specifications.
8. Install a new clutch cover gasket followed by the clutch cover.
Make sure that the throw-out is aligned correctly with the
actuator mechanism in the cover.
9. Tighten the cover bolts in small increments in a star pattern,
then torque the cover bolts to OE specifications.
Throw-out
Pressure plate
Springs and
bolts
