Pg. 6
Doc ID: 191-6305A
Doc Rev: 101818
DISASSEMBLE CLUTCH
1. Soak the EXP disk and TorqDrive
®
friction disks in
primary/transmission oil for 5 minutes. Make sure the EXP and
friction disks are coated on both sides.
2. Lay the bike on its right side. Catch any fuel that might drain in
a suitable container.
Or you can stand the bike vertically on its
center and drain the oil.
3. Remove the left side kickstand bracket using a T45 Torx, then
remove the shift lever using a 6 mm socket. Take care not to
damage the electronics or wires that protrude from the
kickstand bracket.
4. Loosen the jam nut and unthread it
from the cable adjuster.
5. Use channel-lock style pliers to turn
the actuator arm, then detach the
clutch cable from the actuator arm
and the clutch cover.
