Doc ID: 191-6305A
Doc Rev: 101818
Pg. 25
See the following chart for settings. Use the following steps to
change the springs. It is
NOT necessary
to disassemble the EXP
halves to change springs!
ENGAGEMENT
SETTING
SPRING CONFIGURATION
Low
6 Red springs
Medium
3 Red & 3 Blue springs
High
6 Blue springs
Changing the springs
1. Using a flat-blade screwdriver, push the ¼ turn pin in far
enough to clear the opposite side of the EXP to unlock the
pin.
2. With the pin still pushed past the base, turn 90° to remove
the pin and spring.
3. Remove the remaining 2 pins and springs from the same
side of the EXP base.
4. Drop a new spring into the spring slot on the base, then
add the ¼ turn pin.
