6 tanJack® photo QR EN Operating Manual
online banking application. After 15 seconds of inactivity, a message appears, telling you to withdraw
the card or switch the device back on with the OK key. After further 15 seconds, the device switches off
and the tan
Jack
®
photo
QR EN
is in standby mode. When you have finished generating the TAN, you
can switch off the device by withdrawing the card. This saves power and prolongs the life of the
batteries.
Changing the batteries
Use your finger nails or a blunt object such as a plastic card to open the battery compartment and open
the lid by pressing the sides and pulling the tab at the same time.
Three standard AAA 1.5 V alkaline batteries are used.
Please pay attention to the correct battery polarity when changing the batteries.
