10 tanJack® photo QR EN Operating Manual
ATC display with manual data entry
To have the ATC displayed, press the
TAN key
with the chip card inserted until
"ATC activated!
"
appears in the display.
"Start-Code:"
appears in the display immediately after releasing the TAN key. Then, press the
OK key
or the TAN key
, then the ATC is also displayed next to the TAN.
The ATC display is deactivated the next time a TAN is generated.
ATC display with QR or colour matrix code
To have the ATC with QR or colour matrix code displayed, press the
OK key
with the chip card inserted
until
"ATC activated!"
appears in the display.
The reader is ready to photograph the code after releasing the OK key. After photographing the code,
the TAN and the corresponding ATC appear after confirming the transaction data.
