8
9
15180-101 Rev. F
15180-101 Rev. F
Instrument Setup
Unpacking Instructions
The LensChek Plus/Pro and its accessories are packaged so as to
protect them from damage during shipment. The outer box holds an
inner box that contains the LensChek Plus/Pro instrument and an
accessory box.
To unpack the LensChek Plus/Pro, follow these steps:
1. Cut the shipping straps and tape on the Outer Box to access the
Inner Box. Refer to Figure SU-01.
2. Remove the Foam Corners from the inside of the box. Refer to
Figure SU-01.
3. Cut the tape and Straps to access the contents of the Inner Box.
Refer to Figure SU-02.
4. Lift up the Cardboard Flaps from the Inner Box to access the unit.
Refer to Figure SU-02.
5. Remove power cords from the box. Refer to Figure SU-03A.
• Power cord* - 120 V (P/N 16290-003) and
Power cord* - 230 V (P/N 15180-003)
6. Remove the Accessory Box. Refer to Figure SU-03.
7. Carefully remove the LensChek Plus/Pro from the box and
remove the protective cover protecting the instrument from
dirt, contaminants and cosmetic damage.
Refer to Figure SU-03.
8. Remove the User's Guide from the bottom of the box.
9. Remove the accessories from the Accessory Box. This box
contains the following accessories: (Note: The Printer Paper
and the Contact Lens Stand can be placed in the Storage
Compartment for safe storage.)
Refer to Figures SU-03A & SU-05.
• Dust cover (P/N 15180-002)
• Printer Paper (P/N 16290-006)
• Contact Lens Stand (P/N 15180-004)
(for measuring contact lenses.)
Optional Accessories: (available separately)
• RS232 Cable (10 ft) - (P/N 13912-409)
• Wireless Dongle Kit - (P/N 15171)
• Replacement Pens (Set of 3) - (P/N 15180-005)
• Replacement Printer Paper (Pack of 5) - (P/N
12441)
Note:
If any accessories are missing, please contact
Reichert Technologies at the telephone numbers
listed in the Introduction section of this manual.
Note:
Place the packaging materials in a safe storage
location in case you need to transport the unit.
Note:
Please read the User’s Guide before operating the
LensChek Plus/Pro so that you will be familiar with
its operation.
* For other country requirements for cords, contact Reichert.
Figure SU-01 Outer Box Open
Outer Box
Inner Box
Foam
Corners
Straps
Figure SU-02 Inner Box Open
Cardboard
Flap
Cardboard
Flap
Figure SU-03 Inner Box Contents
Inner Box
LensChek
Plus/Pro
Accessory Box
Dust
Cover
Printer
Paper
Contact
Lens Stand
Power
Cords
Figure SU-03A Accessories
