40
41
15180-101 Rev. F
15180-101 Rev. F
Table 206
– Recommended Separation Distances between
Portable and Mobile RF Communications Equip
ment and the LensChek Plus/
Pro for ME Equipment and ME Systems that are
NOT Life-supporting.
Guidance and Manufacturer’s Declaration - Electromagnetic Immunity
Recommended Separation Distances for between
Portable and Mobile RF Communications Equipment a
nd the LensChek Plus/Pro
The LensChek Plus/Pro is intended for use in the electromagnetic environment in which radi-
ated RF disturbances are controlled. The customer or user of the LensChek Plus/Pro can help
prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF Communications Equipment and the LensChek Plus/Pro as recommended below,
according to the maximum output power of the communications equipment.
Max Output
Power of Trans-
mitter
(W)
Separation (m)
150kHz to 80 MHz
d=(3.5/V1)(Sqrt P)
Separation (m)
80 to 800 MHz
d=(3.5/E1)(Sqrt P)
Separation (m)
800MHz to 2.5GHz
d=(7/E1)(Sqrt P)
0.01
0.1166
0.1166
0.2333
0.1
0.3689
0.3689
0.7378
1
1.1666
1.1666
2.3333
10
3.6893
3.6893
7.3786
100
11.6666
11.6666
23.3333
For transmitters rated at a maximum output power not listed above, the recommended separation distance (d)
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (w) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorp-
tion and reflection from structures, objects, and people.
Guidance & Manufacturer's Declarations
(continued)