Mounting the coupling
36
Place the heated coupling hub onto the shaft of the driven machine.
Make sure that the coupling hub cools uniformly. Quenching is prohibited.
Wait until the coupling hub has cooled to hand temperature.
When the coupling hub has cooled to hand temperature on the shaft, reconnect
the flexible coupling element to the coupling hub.
In case that the coupling hub has been balanced together with the flexible
coupling element, this fact is confirmed on the coupling hub and the flexible
coupling element with a stamped-in X.
Make sure that the markings from joint balancing are in alignment.
Mount the flexible coupling element on the coupling hub.
Tighten the bolts to the required torque.
Mounting the coupling element
Type AC…F2
The option of mounting the coupling element on either side allows for two different
mounting lengths with the same coupling hub.
A: long mounting length
B: short mounting length
Refer to the order specifications or to the applicable dimensioned drawing for the
mounting position and the mounting length.
