Mounting the coupling
28
Basic instructions for the types AC…F2K and AC…D
F2K
These types enable the flexible coupling element to be replaced without moving the
coupled machines. The following conditions must be ensured for this purpose:
Make sure that the shaft of the driven machine does not protrude from the coupling
hub.
After loosening the bolts, it must be possible to push the coupling flange back so
that there is sufficient space to radially remove the coupling element.
To achieve maximum movability of the released coupling element, always provide
the mounting length LF with a plus tolerance in the specified tolerance range.
Pertinent information can be found in the applicable technical product description.
