Mounting the coupling
39
Type AC…F2K
Make sure that the connecting surfaces are free of preservative and grease.
If a spacer ring is required, place it onto the coupling hub first.
Mount the coupling element (2) on the coupling hub (3) (A).
In case that the coupling hub has been balanced together with the flexible
coupling element, this fact is confirmed on the coupling hub and the flexible
coupling element with a stamped-in X.
Make sure that the markings from joint balancing are in alignment.
Align the holes of the coupling hub with the threaded bores in the coupling
element.
Insert the bolts (4) and tighten the bolts hand-tight (B).
Tighten the bolts crosswise with the necessary torque, see page 42.
Mark the bolts which have been tightened to the required torque in colour.
