REHM TIGER 180 AC/DC ULTRA Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 68

background image

Commissioning

40

5.6 Guidelines for working with welding current

sources

Only qualified or specially instructed persons who are familiar with the equipment
and the process may be assigned with welding work. When welding always wear
protective clothing and take care to avoid other persons who may be in the
vicinity from being endangered. After finishing the welding work the unit should
be left switched on for a few minutes so that the fan continues to run and residual
heat is removed from the unit.

5.7 Connecting the welding leads and the torch

REHM  TIG  welding  systems  are  equipped  with  quick  connection  devices  for
connecting  the  grounding  cable  and  the  TIG  welding  torch  as  well  as  the
electrode cable. The connection is made by inserting and turning to the right. The
protective  gas  hose  is  connected  to  the  welding  unit  via  a  quick  coupling.  The
torch trigger connector is inserted into the 19 pole socket.

Important!

To prevent unnecessary energy loss during welding ensure that all welding line
connections are tightened and well insulated.

5.8 Connection of external components

The  connection  of  external  components  is  achieved  via  the  standard  19  pole
remote  control  socket  on  the  front  side  of  the  TIGER.  REHM  accessories  are
available for this purpose as described in Section 10.

Only external components listed in this guide may be used. If external

components other than those listed are used, the manufacturer’s warranty is

void.

Important!

When using the 19 pole remote control socket ensure that the guidelines for the
use of serial bus systems are met. Particularly the regulations on
electromagnetic compatibility (EMC). Use only the accessories provided by

REHM.

To ensure that the initialisation of the external connections is always reliable, first
the TIGER power supply switch and then the external devices are switched on.

«
...
38
39
40
41
42
...
»

Содержание TIGER 180 AC/DC ULTRA





































































Отзывы:

Нет отзывов

Похожие инструкции для TIGER 180 AC/DC ULTRA

Бренд: Panasonic Страницы: 40

Бренд: Panasonic Страницы: 56

Бренд: hager Страницы: 6

Бренд: Garaventa Lift Страницы: 58

Бренд: JBL Страницы: 24

Бренд: U-Prox Страницы: 3

Aventage RX-A3040

Бренд: Yamaha Страницы: 8

Бренд: Yamaha Страницы: 4

Бренд: Yamaha Страницы: 8

Бренд: R. Beck Maschinenbau Страницы: 31

Бренд: Orion Welders Страницы: 51

NEVERCOLD 70600

Бренд: EASTMAN Страницы: 11

Бренд: Faraone Страницы: 68

Бренд: Miller Electric Страницы: 31

Бренд: Wolf-Guard Страницы: 11

Бренд: Isonas Страницы: 48

Бренд: Assa Abloy Страницы: 8

Invertec V305-T AC

Бренд: Lincoln Electric Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды