REHM TIGER 180 AC/DC ULTRA, Руководство по эксплуатации

Страница: 31 / 68

Function description
31
4.11.2 Load program
Programs ate loaded using the Load [14] push button.

Briefly pushing the Load [14
] push button illuminates the indicator LED “Pxx”
for loading the program.

Select the desired program number using the push and rotate knob [8] (for
example “P34”). Program numbers that are already assigned are shown in the
digital display [5].

Push and hold the Load [14] push button for approximately 2 seconds. When
loading the digital display disappears [5] for approximately 0.5 seconds. The
desired program in loaded.
4.11.3 Save program
Programs are saved using the Save [13] push button.

Perform the desired machine settings (welding parameters) on the TIGER
system.

Briefly pushing the Save [13
] push button illuminates the indicator LED “Pxx”
for saving the program.

Select the desired program number using the push and rotate knob 8. The
program number is shown in the digital display [5]. If a program number has
already been assigned a “P” always appears before the number (for example
“P34”). A free program number is indicated with a “
-
“ before the number, (for
example “
-
35”) or two dashes "
--
" (for example “—35”).

Push and hold the Save [13] push button for approximately 2 seconds. The
program is saved. When the values are saved the digital display [5]
disappears for approximately 0.5 seconds. The desired program in saved.
Note: It is recommended that a table is created for managing the programs in
which the respective program numbers and the associated task are
listed.
4.12 Electrode welding
The welding current can be infinitely adjusted using the push and rotate knob [8].